Lighting

The Button Blinky Safety Set provides a quick way to keep you visible on your next bike ride. Two high output LEDs give you steady and flashing modes with 160° of visibility. These little lights are brilliant, easy to mount and cute as a button! Button Blinky front specs: - 2 high output surface mounted LEDs provide steady and flashing modes - FL1 Tested - Run times: 12 hrs (steady – 15 lm) and up to 40 hrs (flashing - 15 lm) - Provides 160° of visibility - One CR2032 battery (included) - Mounts with rubber stretch strap - 18 grams Button Blinky rear specs: - 2 high output surface mounted LEDs provide steady and flashing modes - FL1 Tested - Run times: 20 hrs (steady – 4 lm) and up to 50 hrs (flashing - 4 lm) - Provide 160° of visibility - One CR2032 battery (included) - Mounts with rubber stretch strap - 18 grams

- Attaches to rear racks - Compatible with: Blinky 3,5,7 and Superflash - 25mm between each of the top horizontal holes (center to center) - Requires an "L bracket" that typically comes with a rear rack. If your rack is missing the L bracket, you can purchase Planet Bike's rack hardware pack

Planet Bike's Superflash USB uses super bright LED's for visibility up to 1 mile. The ultra-compact case is weatherproof, light and durable, and features a soft-touch power switch. A USB-rechargeable lithium ion battery provides up to 36 hours of run time.

Increase your line of sight with the NiteRider Lumina Helmet Mount. By mounting your head light onto your helmet, it’ll allow you to see farther into your turn or wherever your head turns. System Compatibility: - Lumina Series - MiNewt Mini Series - Mako Series

The Swift 300 gives you more than enough lumens at our lightest weight for headlights (82 grams). NiteRider makes this headlight USB rechargeable for convenient on-the-go charging. The Swift 300 features a highly durable light housing with Dupont Fiberglass reinforced nylon meeting all required FL1 Standards for impact testing and water / dust resistance. Vmax+ 150 is NiteRider's first taillight featuring COB (Chip-on-Board) LEDs, which for cyclists means it emits highly visible flash patterns in a smaller, more compact package. Its feather-like light weight makes it perfect as a wearable safety light-easily clipping onto straps, belt loops, and more. SWIFT 300 FRONT LIGHT FEATURES - Lumen Output: 300 - 5 Modes with Run Times: 2:00 – 28:00h - Charge Time: 2:00h at greater than 500mA | 3:15h at 500mA - Water / Dust Resistant IP64 Rated - USB Rechargeable SWIFT 300 TYPICAL RUN TIMES Low—15:00h at 80 Lumens Med—9:00h at 150 Lumens High—2:00h at 300 Lumens Flash—12:00h at 300 Lumens Walk—28:00h at 20 Lumens Vmax+ 150 TAILLIGHT FEATURES - Lumen Output: 150 - 6 Modes with Run Times: 5:30-27:30h - Charge Time: 2:00h - Water / Dust Resistant IP64 Rated - USB-C Rechargeable Vmax+ 150 TYPICAL RUN TIMES Fast Flash—12:45h Slow Flash—10:15h Disco Flash—10:45h Pulse Flash—7:00h High Steady—5:00h Low Steady—27:00h

The ultra-compact Vibe Pro Headlight is the perfect lighting solution for effortless, smart safety. This extra bar mount lets you switch the light between bikes in seconds - perfect for families or those with a quiver of two-wheeled fun. The included non-slip strap easily fits around oversize bars but can be cut down for an ideal fit on small handlebars. Features - Innovative twist-lock system ensures Vya will lock into mount - Secure design allows Vya Pro Headlight mount to be placed above or below the handlebar due to its unique design. Vya Headlight is designed to be mounted in front of stem. - Compatible with Vya Pro Headlight and standard Vya Headlight

X3 Front Light: - Double-lens technology provides HIGH-QUALITY precise light distribution - LED STRIP shows battery level - Side lighting for INCREASED VISIBILITY AND SAFETY - MEMORY FUNCTION remembers the last mode used - Fully USB-RECHARGEABLE - NEW snap-tight bracket - 30 LUX - 5 Modes - Run time on Eco = 24 hrs - Run time on High Steady = 4 hrs XR Rear Light: - Light guide for INCREASED VISIBILITY AND SAFETY - MEMORY FUNCTION remembers the last mode used - Fully USB-RECHARGEABLE - Compact size - Bracket with flexible mounting option - .06 LUX - 5 Modes - Run time on Eco = 36 hrs - Run time on High Steady = 20 hrs

- Light guide for INCREASED VISIBILITY AND SAFETY - MEMORY FUNCTION remembers the last mode used - Fully USB-RECHARGEABLE - Compact size - Bracket with flexible mounting option - .06 LUX - 5 Modes - Run time on Eco = 36 hrs - Run time on High Steady = 20 hrs

Recon-E Light to Bosch motor unit connector cable.

- Maximum output to 20 lumens - ANSI certified lumens and runtime - IPX4 water resistant - Power status indicator alerts remaining run-time before powering off - Light memory mode - Compatible with Rev Comp, Compel, Roost, Strive, Lanza, Coveta, Liv Rev Comp and Luta series helmets

- Integrated d-fuse seatpost magnet mount - Magnets hold the light firmly in place

- Reliable and high quality LED Lamps and strips from leading manufacturer CREE - Total internal reflection (TIR) lenses draw LED light into efficient, well-controlled beams that maximize the usable lumens in the target area without glare - Precisely milled CNC 6061 Aluminum Housing for durability as well as fast heat dissipation - IPX6 waterproof rating - Different from traditional lithium battery bike lights, RECON-E lights are designed to plug into and work with most major - E-bike motor systems - Handle bar remote switch for on the fly control - Three mounting options - ANSI Certified

An easy to attach mount that allows you to clip your Recon TL to any compatible Giant helmet.

Helmet mount kit compatible with Ranger, Expilion, Metro Pro and Plus, Metro, Streak, and Pace systems. - Includes: helmet bracket, velcro strap, and foam pad.

The compact, durable AMPP 800 offers superior beam patterns on or off road. Combined with its three-level battery indicator means there is always time to get home. FEATURES: - High-power rechargeable headlight (800 lm) - Powerful wide beam with OptiCube lens technology - Excellent side cut outs for enhanced side visibility - Large-capacity lithium-ion rechargeable battery - 3-level battery indicator (Blue: above 50% | Yellow: 30-50% | Red: Less than 30%) - Compact and robust alloy body - USB rechargeable (Micro USB cable included) - Mode memory function - 5 light modes: High, Middle, Low, Daytime HyperConstant, Flashing - Double click to turn on High mode - Secure FlexTight bracket for quick installation - Water resistant - Optional helmet mount, center fork bracket available Modes/Run time: - High mode: 800 lumens | 1.5hrs - Middle mode: 400 lumens | 2hrs - Low mode: 200 lumens | 4hrs - Daytime HyperConstant mode: 800/200 lumens | 4hrs - Flashing mode: 200 lumens | 30hrs Dimensions/Weight: - 32 x 102 x 33 mm - Weight: 136 grams (light unit and battery) Light source: - High intensity white LED X1 Optional Parts: - Center Fork Bracket (5342440) - Helmet mount (5341831N) Recharge time: - Approximately 3-7hrs (USB2.0 recharge) - About 300 recharge times (until rated capacity drops to 70%)

Maximize your visibility with this amazing taillight. The SuperFlash aims 2 extreme LEDs plus a half-watt Blaze LED for light that can be seen for up to 1 mile! The ultra-compact case is weatherproof, light and durable. And, the SuperFlash includes a bike mount and clip mount for multiple mounting options. Plus, the 2 AAA batteries (included) offer run times up to 100 hours.