Parts & Accessories

Increase your hydration capacity with Origin-8's HydroRail Double Seat Bracket. This bracket mounts to your saddle rails and holds two bottle cages. And, the angle is fully adjstable so you can customize it to keep your bottles within easy reach. Bottles and cages sold separately.

The Crux delivers 20% more water per sip, with an ergonomic handle for easier refilling, and an on/off lever that makes it easy to prevent leaks. - Offers 20% more water per sip - Leak-proof cap is easier to open and close - On/off lever lets you seal your drinking tube shut with one hand - Hydroguard technology inhibits the growth of bacteria in the reservoir and tube - Big bite valve self-seals after each drink, eliminating annoying drips - Dimensions: 30 x 18 x 6 cm/ 12 x 7 x 2.5 in

Colored talons for the Raptor Cage. Now you can finally match your cage to your bike at a low cost!

The Crux delivers 20% more water per sip, with an ergonomic handle for easier refilling, and an on/off lever that makes it easy to prevent leaks. - Offers 20% more water per sip - Leak-proof cap is easier to open and close - On/off lever lets you seal your drinking tube shut with one hand - Hydroguard technology inhibits the growth of bacteria in the reservoir and tube - Big bite valve self-seals after each drink, eliminating annoying drips - Dimensions: 38 x 19 x 6 cm / 15 x 7.5 x 2.5 in

Kick up all the dirt you want, without eating it. This mud cap is compatible with all new Podium bottles launched in 2019, including Podium Chill, Podium Big Chill and Podium Ice. No matter what bottle you prefer, you can now drink clean.

Aluminum BTA hydration mount compatible with Torpedo Versa (sold separately). Pre-drilled front mounting holes for Torpedo Versa or aero computer mounts. - Adjustment Width: 75-150mm - Construction (Plate): 6061-T6 Aluminum - Construction (Brackets): Nylon composite with Velcro straps coated with no-slip extension grip - Weight: 1.9oz (55g)

New Torpedo Bottle and essentials to reload your Torpedo System, or upgrade to the new Anti-Leak Design. Includes: Super-Sealed TORPEDO Bottle, Straw, Drink Valve, Solid and Split Lids, Leak-Free Breather Valve, Dolphin Tail Straw Retainer and Hardware.

Versatile mount for additional water bottle cage or other accessories. Band style clamp provides easy installation and flexible mounting options. - Fits tubes 20 - 60mm - Engineering grade polymer - Max load: 1.5 kg / 3.31 lb - 26 g / 0.92 oz (2 pcs)

XLAB's Mezzo Cage Pod is a screw-top holder for your on-the-road tools and spares that fits in your bottle cage. It's convenient to move from bike to bike, it protects your gear, and it includes a fleece bag so the contents in the pod don't rattle and make noise inside. The pod is 750ml capacity to hold a spare tube, levers, CO2 inflator and multi-tool.

Durable, fiber reinforced Composite Matrix construction. Optimized side-load shape for easy bottle access in compact frames (right side configuration only). Integrated storage container below the cage with CO2 cartridge holders on both sides of the cage. Engineered to hold bottles securely. Oval mounting holes allow fine tuning of position on frame. - Weight: 94g

- Extra-strong magnet keeps the drinking tube in position during your activity. - Two-piece design for attachment to the hip belt, backpack or vest - Fits all EVOC hydration systems (excluding insulated drinking tubes)

Our lovely VO bottle cage mount allows you to affix water bottle cages on your handlebars. They are made of extruded aluminum and are intended for city bikes, so they fit bars up to 25.4mm. The mount comes with the two bolts needed to attach the cage to the mount (Some riders will want to use them on the 26mm "sleeved" road bars. In that case you'll need to file just a touch off the top edge of the "hinge" section so it opens a liitle wider. Of course, it's no problem to use them on "bulged" road bars.)

Park Tool's Mini Bottle Opener is made of durable, rustproof stainless steel and has Park's great-to-grip and attractive blue vinyl-coated handle. This handy tool fits on a keychain and has a bottle opener and 10mm open-end wrench built in.

The Dakine 2L Hydrapak design of the Replacement Reservoir is engineered to be durable and easy to use. The Shape-Loc center baffle adds some rigidity to the shape of the bladder, which cuts down on shifting of water weight while you're in motion and makes for a more resilient design. Meanwhile, the wide-mouth opening and plug-and-play connecters make it easy to fill, drain, and clean. And, of course, it's BPA- and PVC-free.

Adapter for direct mounting of the Fuel Pack or other equipment with screw connections. Are you planning to mount the Fuel-Pack or a bottle holder on your bike but find the threaded holes are not in the right place? The Offset-Plate 64 MM gives you a flexible way of adjusting the position of the Fuel-Pack, a bottle holder or other equipment with screw connections.

Make quick work of any bottle-cap-removal operation with Park's BO-2 Bottle Opener. This ergonomic tool is made of stainless steel with a comfy vinyl coating.

B-RAD Everywhere Base 3

- Universal bar mount bottle cage adapter fits 22.2-35mm diameters - Can be adjusted to any angle using the provided 4mm hex wrench - Tough nylon composite construction - Bottle cage not included

- Individually packaged - Enables mounting of a bottle cage in a variety of positions - Fits 22.2-26.0mm handlebars

Carry your gear behind you tucked out of the wind with XLAB's Super Wing Dual Rear Carrier. This versatile aero add-on delivers options galore. You can easily attach what you need for any length ride. A small seat bag fits inside the carrier, bottle cages attach on the outside and tubes can go underneath (accessories sold separately). The possibilities are endless. You also have 12 different mounting options so you can place your bottles where you want them. Also, the Super Wing is made of light, tough aluminum so there's no twisting under load, no swaying while riding and no bouncing or lost bottles over bumps.

XLAB's Mini Cage Pod is a screw-top holder for your on-the-road tools and spares that fits in your bottle cage. It's convenient to move from bike to bike, it protects your gear, and it includes a fleece bag so the contents in the pod don't rattle and make noise inside. The pod is 500ml capacity to hold a spare tube, levers, CO2 inflator and multi-tool.

- Customize your race belt with this lightweight slide on accessory - Holds up to four gel packs - Compatible with all Ergo & Ultralight Belts

Keep your tube close and hydration on-tap with the Magnetic Tube Trap.

Our new Fusion 6L Group Hydration Reservoir is perfect for adventures with friends and family. Enjoy our campout convenient high flow spigot for filling vessels, washing hands or cooking. It's enhanced by Hypalon-reinforced hanging points let you hang from a tree or other surface for performance no matter where you are. Compatible with CamelBak filtered by LifeStraw reservoir filter kit for clean drinking water on the go. Pair with our ChillBak Pack 30 Cooler for portable party people to keep beverages cool. Dig dynamic design compatibility with our CamelBak reservoir filter kit and easy collapsibility for simple storage when the party's home for the week.  Made with safer chemicals, earning the Repurpose Green Sustainability Badge. 

Enjoy our campout convenient high flow spigot for filling vessels, washing hands or cooking. Hypalon-reinforced hanging points let you hang from a tree or other surface for performance no matter where you are. Compatible with CamelBak filtered by LifeStraw reservoir filter kit for clean drinking water on the go. Even better, the reservoir filter kit has easy collapsibility for simple storage when the party's home for the week.  Repurpose Green Sustainability Badge: Made with safer chemicals.

The all-in-one tool kit for faster cleaning and drying of your CamelBak Crux reservoir.

Mount any water bottle cage using our Cage Strap Adapter to any diameter of 3.25" or less. This will allow you to mount a water bottle in all kinds of different areas on your bike—you choose what is best for you! The extra-wide length can be cut to your desired length. The Adapter won't move around because it has a rubber base and compresses on your frame when mounted.

The BPA- and PVC-free Hydration Bladder 2 Insulated with insulated hose and a 20% increase in water flow lets you lap it up on even the coldest day in the snow. - Leak-proof and easy to fill with Slide Seal - Easy to clean all parts - Can be filled with hot or cold water (up to 60°C) - Volume: 2L - Weight: 140g - Measures: 17 x 32 x 1cm

The durable Hydration Bladder 2 for backpacks contains no BPA or PVC. The easily-detachable hose and valve increase water flow by 20%. - Can be filled with hot or cold water (up to 60°C) - Leak-proof and easy to fill with Slide Seal - Easy to clean all parts - Volume: 2L - Weight: 130g - Measures: 17 x 32 x 1cm

Our improved bite valve design delivers 25% more flow. The universal cap is leak-proof when closed and spill-proof when open, features an easy carry handle, and is compatible with Chute Mag and Hot Cap vessels.